A burr is on the lock bolt.

1. Inspect the lock bolt.
2. Replace the lock bolt as needed. Refer to Steering Colum Housing - Disassemble (Floor Shift) or Steering Column Housing - Disassemble (Column Shift).

The actuator rod is restricted.

1. Inspect the rod.
2. Service the road as needed. Refer to Steering Column Housing - Disassemble (Floor Shift) or Steering Column Housing - Disassemble (Column Shift).

The following components are damaged:

1. Inspect the components.
2. Replace the components as needed. Refer to Steering Column Lock Cylinder Set - Disassemble - Off Vehicle or Steering Column Lock Cylinder Set - Disassemble - Off Vehicle or Lock Housing Assembly - Disassemble (Floor Shift) or Lock Housing Assembly - Disassemble (Column Shift) or Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle or Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle .

The ignition switch is stuck.

1. Inspect the switch.
2. Replace the components as needed. Refer to Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle or Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle .

Interference between the bowl and the rack coupling is present.

1. Inspect the components.
2. Service the components as needed. Refer to Steering Column Housing - Disassemble (Floor Shift) or Steering Column Housing - Disassemble (Column Shift)

The shift linkage is maladjusted.

1. Inspect the linkage.
2. Service the components as needed. Refer to Range Selector Lever Cable Replacement .

The lock bolt spring is broken or worn.

1. Inspect the spring.
2. Replace the components as necessary. Refer to Steering Column Housing - Disassemble (Floor Shift) or Steering Column Housing - Disassemble (Column Shift).

The sector is incorrectly installed.

1. Inspect the sector installation.
2. Service the components as needed. Refer to Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle or Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle .