GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1996 🢒 Century 🢒 Engine 🢒 Engine Controls - 2.2L 🢒 Fuel Pump Strainer Replacement

Removal Procedure

    Object Number: 37287 Size: SH
  1. Relieve fuel system pressure. Refer to Fuel Pressure Relief Procedure .
  2. Drain fuel tank. Refer to Fuel Tank Draining .
  3. Remove the fuel tank. Refer to Fuel Tank Replacement .
  4. Remove the fuel sender assembly.
  5. Note strainer position for future reference.
  6. Support the fuel pump with one hand and grasp the strainer with the other hand.
  7. Pull the strainer (4) off of the fuel pump (2).
  8. Discard the strainer.

Installation Procedure

    Object Number: 37287 Size: SH
  1. Position the new fuel pump strainer on the fuel pump and push on the outer edge of the fuel pump stainer until the strainer is fully seated.
  2. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement
  3. Install the fuel tank. Refer to Fuel Tank Replacement
  4. Refill tank.
  5. Inspect for fuel leaks through the following steps:
    6. 5.1. Turn the ignition switch to the ON position for two seconds.
    5.2. Turn the ignition switch to the OFF position for ten seconds.
    5.3. Turn the ignition switch to the ON position.
    5.4. Check for fuel leaks.