GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Buick
🢒
2008
🢒
Allure
🢒
Body Hardware and Trim
🢒
Floor Coverings and Headlinings
🢒 Rear Compartment Trim Panel Replacement
Tools Required
J 38778
Door Trim Pad Clip Remover
Removal Procedure
Open the rear compartment.
If equipped, remove the rear compartment convenience net and net retainers.
Remove the sill plate. Refer to
Rear Compartment Sill Trim Plate Replacement
.
Remove the floor trim panel. Refer to
Rear Floor Trim Plate Replacement
.
Remove the seat back. Refer to
Rear Seat Back Replacement
.
Use
J 38778
to remove the push-in retainers from the trim panels.
Slide the panels off the metal supports.
Remove the trim panels from the rear compartment.
Installation Procedure
Position the trim panels in the rear compartment.
Position the trim panels on the metal supports by the rear seat back.
Install the push-in retainers.
Install the floor trim panel. Refer to
Rear Floor Trim Plate Replacement
.
Install the seat back. Refer to
Rear Seat Back Replacement
.
Install the sill plate. Refer to
Rear Compartment Sill Trim Plate Replacement
.
Install the rear compartment convenience net, if equipped.
Close the rear compartment.