GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2005 🢒 Allure 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Rear Object Alarm Module Replacement

Removal Procedure

    Object Number: 1357333 Size: SH
  1. Remove the rear window shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .
  2. Disconnect the rear parking assist (RPA) receiver electrical connector (2).

    3. Object Number: 1357202 Size: SH
  3. Remove the fasteners from the RPA receiver.
  4. Remove the receiver from the rear shelf.

Installation Procedure

    Object Number: 1357202 Size: SH
  1. Install the RPA receiver to the rear window shelf .
  2. Install the RPA receiver fastener.

    3. Object Number: 1357333 Size: SH
  3. Connect the electrical connector (2) to the RPA receiver.
  4. Install the rear window shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .
  5. Refer to Control Module References for programming and setup information.